Installation Guide

3
/
8
TOOLS
Safety glasses / maker / silicone adhesive sealant / tape measure / Jigsaw / rags / wood braces / level / screws /
bladed screwdriver
Step 1
: Measure the height of apron sink, cut cabinet front cutout and countertop
cutout accordingly.
Step 2 : Make a proper frame under to support the farmhouse sink.
Cut two support framings to extend along the inner walls of the cabinet on each side of the base.
Mark the location of the support mounting as shown to ensure that the rim of the sink will sit at
framings and slightly below the top edge of the cabinet.