Version 1.0 FRANÇAIS USER’S GUIDE ENGLISH SWEET PEEP MAX VIDEO BABY MONITOR ESPAÑOL www.lorexbaby.
Safety Precautions • Adult assembly is required. Keep small parts away from children when assembling. • This product is not a toy. Do not allow children or infants to play with it. • This video monitor is not a substitute for responsible adult supervision. • Test the video monitor before use. Become familiar with its functions. • Keep the cords out of reach from children and infants. • Never use extension cords with power adapters. • Only use the chargers and power adapters provided.
Product Includes ...............................2 Monitor Overview ............................3 Camera Overview ............................4 Getting Started ................................5 Optional - Camera Batteries...................... 7 Optional - Wall Mounting the Camera........ 8 Using Your Baby Monitor .................9 Using the Menus...................................... 9 Talking to Your Baby............................... 10 Changing Channels................................
Product Includes x1* x1* Power Adapter Camera x2* x2* x2* Cable Clips Screws & Anchors x1 x1 LINK Power Adapter Monitor x1 Battery *Contents may vary by model 2
Link LED Menu Volume LEDs Power LED Power / Video Off ENGLISH Monitor Overview 2x Zoom / Volume Up LINK Play / Stop Lullabies 1x Zoom / Volume Down Video Display Change / Pair Camera Microphone Two-way Talk Antenna Stand Battery Compartment 3 Speaker
Camera Overview Night-light Light Sensor Nighttime LED’s Lens Antenna Microphone Power LED Mounting Stand AAA Battery Compartment Power Port DC 6V Power Switch Temperature Sensor Speaker PAIR 4 Pair Button
Connect the power adapter to the camera. DC 6V 1 ENGLISH Getting Started Make sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child. Use the included cable clips to help keep power cords away from your child. 2 Slide the power switch to ON. The power LED glows. DC 6V Power Switch 3 Using a flathead screwdriver (not included), remove the battery compartment cover on the monitor.
4 Insert the included battery as shown below. 5 Replace the battery compartment cover and secure with screw. If you do not plan to use the unit for a prolonged period of time, remove the battery or ensure you charge it at least once every 6 months. 6 Connect the power adapter to the monitor. The power LED glows. LINK 7 Press and hold the power button to turn on the monitor.
• It is recommended to charge the battery for 6 hours before use. • For overnight monitoring, it is recommended to connect the power adapter. When fully charged, the monitor will stay on up to 6 hours in normal mode or 10 hours on Video OFF mode (see page 18). • For better reception, flip up the antenna on the monitor and camera. Pull up to extend antenna DC 6V LINK Optional - Camera Batteries Unscrew the battery compartment under the camera and insert 4x AAA batteries (not included).
Optional - Wall Mounting the Camera Before permanently mounting the camera: • Determine where you will get the best view of your baby. • Ensure the power cable is long enough to power the camera. Make sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child. Use the included cable clips to help keep power cords away from your child. Cable Clips 1 Drill 2 holes in the wall with centers exactly 68mm apart. 2 Tap anchors into holes with a hammer.
The monitor shows the following icons during use: Icon Meaning 1 Scan X2 Icon Meaning Signal strength VOX (Voice Trigger) on Selected channel Battery full Scan mode activated Battery low Volume muted Battery charging Digital zoom activated Battery finished charging 70°F Move zoom area ENGLISH Using Your Baby Monitor Current room temperature Pairing channel Song currently playing Camera out of range or off (e.g.
Talking to Your Baby 1 LINK Press and hold to talk to the currently selected camera Audio from the camera is muted while using this feature. Changing Channels 1 LINK C1 Press to cycle through connected cameras or select Scan mode. The currently selected camera is shown on screen. The monitor only plays sound from the camera that is currently being viewed. Using Scan Mode (multiple cameras only) When two or more cameras are connected, you may use Scan mode to cycle through video from each camera.
ENGLISH When Scan mode is activated, the monitor changes channel automatically every few seconds. A Scan icon appears next to the currently selected channel number. Scan mode activated Currently selected channel LINK 1 Scan To connect additional cameras to the monitor, see “Pairing Additional Cameras” on page 19. If you wish to only monitor some of your cameras using Scan mode, you may choose to hide certain channels. Hidden channels will not be shown in Scan mode.
Adjusting Volume 1 LINK Press to adjust the volume of the monitor Adjusting Screen Brightness 1 LINK Press and hold to open the menu 2 LINK Press repeatedly until is shown 3 LINK Press to adjust the brightness 4 Press to save changes and exit menu.
1 LINK just of r Press and hold to zoom in x2 2 While zoomed in, press appear on the monitor. ENGLISH Using Digital Zoom . Four arrows LINK hold e 3 tedly Use the arrow keys to move the zoom area. Before you can return to normal viewing mode, you must press to disable the on-screen arrows. 4 LINK x1 Press and hold to zoom out just ess enu.
Turning on the Night-Light 1 LINK Press and hold to open the menu 2 LINK Press repeatedly until shown OFF 3 LINK Press to turn the night-light on / off ON 4 is Press to save changes and exit menu. Playing Lullabies The camera can play 5 different pre-loaded songs.
LINK Press to stop playing lullabies hold e tedly s n ght ENGLISH 3 If a lullaby is playing, it will stop when the talk feature is used. Temperature Alerts The temperature alert feature allows you to ensure the baby’s room is at a comfortable, safe temperature. The monitor beeps if the temperature gets too hot or cold. Temperature sensor is accurate within 3°F/1°C. You can control the high and low temperatures that trigger alerts or disable temperature alerts.
4 LINK Press repeatedly Hi 82° F 5 until Hi is shown Press to adjust the high temperature. If the temperature at the selected camera goes above this temperature, the monitor will beep and the temperature reading on the monitor will flash orange. If you select a temperature above 86°F / 30°C, the high temperature alert will be turned OFF. 6 Press to save changes and exit menu.
In VOX mode, the monitor’s screen and speaker will turn off after a minute unless sound is detected at the selected sensitivity level. This conserves battery power, and alerts you only when needed. 1 ENGLISH tedly Enabling VOX Mode (Voice Trigger) LINK Press and hold to open the menu 2 LINK Press repeatedly until is shown enu.
Video Off Mode (Audio Only Mode) 1 LINK Press to enter Video Off mode The monitor’s video display is turned off. The monitor plays sound from the selected channel only. Notes • If Scan mode is enabled, the monitor will play sound from the channel that is currently selected. • VOX mode will override Video Off mode. See “Enabling VOX Mode (Voice Trigger)” on page 17 for details. 2 Press any button to turn the video display back on.
The camera(s) included have already been paired with the monitor. If you have purchased additional add-on cameras (model# LB2251AC1), OR if your monitor and camera are not paired up, follow the steps below. ENGLISH ter Pairing Additional Cameras To pair a camera with the monitor: 1 2 Place the camera and monitor next to each other. Make sure the camera is turned on. LINK C1 Press and hold until 3 is shown on the monitor.
5 Press the PAIR button on the back of the camera. PAIR button PAIR Video from the camera is immediately shown on the monitor once the camera is successfully paired. If your monitor reads “Out of Range“, then pairing was not successful. Complete the pairing process again. Notes • Immediately move the camera away from the monitor to avoid speaker feedback. • The monitor can connect up to 4 cameras. 3.
ENGLISH Technical Specifications Camera Frequency 2.4GHz Maximum Range Up to 450ft / 138m outdoors* Up to 150ft / 46m indoors* Image Sensor 1/5” Color CMOS Lens 3.0mm F2.5 IR LED 6 pcs Power Adapter 6.0V DC 800mA Battery Supports 4x AAA Batteries (not included) Battery Life Up to 4 hours on AAA batteries Weight 0.3lbs / 0.1kg Monitor Frequency 2.4GHz Display 4.3” TFT Color LCD Power Adapter 6.0V DC 800mA Battery Li-ion Rechargeable Battery 3.
Troubleshooting Problem No video displayed on the monitor Solution • Press and hold the button to power on the monitor. • Monitor is out of batteries. Plug in the monitor power adapter. • Video Off or VOX mode is on. Press any button to turn the screen back on. Monitor screen keeps turning off • VOX mode is on. See “Enabling VOX Mode (Voice Trigger)” on page 17 for details on disabling VOX mode. • The monitor battery is low. Plug in the monitor power adapter.
CLEANING Clean the monitor and camera with a slightly damp cloth or an antistatic cloth. Never use cleaning agents or abrasive solvents. • Do not clean any part of the product with cleaners with thinners or other solvents and chemicals. This may cause permanent damage to the product, which is not covered by the Warranty. When necessary, clean it with a damp cloth. • Keep your camera and monitor away from hot, humid areas or strong sunlight, and do not get it wet.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.