User's Manual
Table Of Contents
- 1 Important Safeguards
- 2 Package Contents
- 3 Recorder Overview
- 4 Basic System Setup
- 5 Camera Installation
- 6 Using the Mouse
- 7 Using the On–Screen Display
- 8 Recording
- 9 Playback
- 10 Backup
- 11 Motion Detection
- 12 Active Deterrence
- 13 Managing Passwords and User Accounts
- 14 Using the Main Menu
- 14.1 Playback
- 14.2 Alarm
- 14.3 Backup
- 14.4 Display
- 14.5 Camera
- 14.6 Network
- 14.7 System
- 14.7.1 Configuring General System Settings
- 14.7.2 Setting Date & Time
- 14.7.3 Configuring Holidays
- 14.7.4 Configuring IP Filter
- 14.7.5 Save System Settings to a USB Flash Drive
- 14.7.6 Import System Settings from a USB Flash Drive
- 14.7.7 Restoring Default Settings
- 14.7.8 Upgrading Firmware Manually
- 14.7.9 Automatic Firmware Upgrades
- 14.8 Storage
- 14.9 Account
- 14.10 Information
- 14.11 Copying Settings to Another Channel
- 15 Connecting Remotely using the Lorex Home Mobile App
- 16 Smart Home & Voice Assistance
- 17 Pan/Tilt/Zoom (PTZ) Cameras
- 18 Connecting Audio Devices
- 19 Replacing the Hard Drive
- 20 DDNS Setup (Advanced)
- 21 Troubleshooting
- 22 Technical Specifications
- 23 Notices
Playback9
8. Playback Controls:
•
/ Play / Pause
•
Stop
•
Play Backwards
•
Previous Frame: Go to the previous frame when video is paused.
•
Next Frame: Go to the next frame when video is paused.
•
Slow Playback: Click repeatedly to slow the video down by half speed up to 16×
slower than normal. Click again to return to regular speed.
•
Fast Playback: Click repeatedly to double the speed of the video up to 16× faster than
normal. Click again to return to regular speed.
•
Volume / Mute: Hover over to reveal the volume bar, where you can set the volume
for audio in playback. Click to mute/unmute.
NOTE
◦ Audio recording must be enabled to capture audio in playback recordings. For full instructions on ena-
bling audio recording, see 18 Connecting Audio Devices, page 87.
◦ To hear recorded audio, you must be viewing an audio–enabled camera in single channel. You must al-
so be using an HDMI monitor with built-in speakers, or connect an external speaker to the recorder in
order to hear audio.
• Digital Zoom: Click to enable digital zoom. Click-and-drag over the camera image to
zoom in on the selected area. Right-click to return to the full camera image. You can then
repeat to zoom in on a different area, or click the icon again to disable zoom.
•
Smart Search: Click to select an area of the camera image and play back all record-
ings with motion in the selected area. For full details on Smart Search, see 9.4 Smart
Search, page 26.
•
Person/Vehicle Filter: Hover over to reveal Person/Vehicle checkbox. Click to filter
recordings on selected channels to show only Person/Vehicle detection events.
CAUTION
A maximum of 4 channels will support Person/Vehicle detection at once. By default, channels 1-4 have
Person/Vehicle detection enabled. See 11 Motion Detection, page 34 to set preferences for Person/Vehicle
detection.
• Snapshot: Save a snapshot of the current camera image to a USB flash drive (not
included).
•
Add Bookmark: Shows.
•
Video Clip: Back up a custom video clip to a USB flash drive (not included). For full
instructions, see 9.5 Video Clip Backup, page 27.
#LX400111; r. 1.0/55872/56018; en-US 25