User's Manual

Using the Main Menu14
3. Click Add New Holiday.
4. Configure the following:
• Holiday Name: Enter a name for this holiday.
• Repeat Mode: Select Once for the holiday to occur only this year or Always for the holi-
day to be repeated each year.
• Holiday Range: Select Date to select a specific date, or select Week to select holidays
based on which week they fall on.
• Start Time / End Time: Set the start and end time for this holiday.
• Add More: Click to enable (
) to configure another holiday.
5. Click Add.
14.7.4 Configuring IP Filter
Configure permissions for external IP addresses attempting to access the unit.
To configure the IP filter:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click SYSTEM, then click the SECURITY tab.
3. Under Type, select which type of filter to apply:
• Network Access — Whitelist: IP addresses that are permitted to access the recorder.
• Network Access — Blacklist: IP addresses that are not permitted to access the recorder.
• Sync Time — Whitelist: IP addresses that are permitted to sync the recorder’s time.
4. Click to enable (
) / disable ( ) the selected filter type.
#LX400111; r. 1.0/55872/56018; en-US 67