User's Manual

Using the Main Menu14
5. Configure the following:
• To add a single IP address to the selected filter type, enter it into Start Address, then click
Add IP Address.
• To add a range of IP addresses to the selected filter type, enter the Start Address and End
Address, then click Add IP Section.
6. Click Apply.
14.7.5 Save System Settings to a USB Flash Drive
The system allows you to save your current system configuration to a USB flash drive (not in-
cluded). This is useful if you want to backup your current settings.
NOTE
This function only saves settings created in system menus. It does not save or backup any video.
Prerequisite:
• Connect a USB flash drive (not included) to a free USB port on the unit.
To save system settings:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click SYSTEM, then click the CONFIG BACKUP tab.
3. Under Device Model, select the USB device where you would like to save the configuration.
4. Click Export to save your current system configuration.
14.7.6 Import System Settings from a USB Flash Drive
If you have backed up your system configuration, you can import it to apply all your saved menu
settings.
Prerequisite:
• Connect a USB flash drive (not included) to a free USB port on the unit with an exported sys-
tem configuration (see 14.7.5 Save System Settings to a USB Flash Drive, page 68 for full
details).
To import system settings:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
#LX400111; r. 1.0/55872/56018; en-US 68