Installation Guide

c
Before You Start:
• Make sure you
have a router
and high-speed
Internet access
(not included).
LNK7000 SERIES
Congratulations! You can now view video from your cameras on your PC or Mac.
• Connect your NVR
to your router
using an Ethernet
cable (see the
Quick Connection
Guide for details).
• Upgrade your NVR
firmware and client
software or mobile
app to the latest
versions.
LNK7000_SERIES_QNG_EN_R1
PC / Mac Setup
a
• PC Users: Download and install FLIR Client 12 for
PC from lorextechnology.com/support.
Download and install the client software:
• Mac Users: Download and install FLIR Client 12
for Mac from lorextechnology.com/support.
Double-click to extract the software, then drag
the software to Applications.
b
c
Click Login.
d
Double-click the FLIR Client 12 icon ( )
on the desktop or Applications list.
Enter the
NVR’s Device
ID recorded in
section 1
Find Your Device ID
Record your information below:
DEVICE ID:
2
The Device ID is printed on a label on the top panel of the NVR.
Device ID: xxxxxxxxxxx
1
2
• Please note that an upload
speed of 2 Mbps is required
for remote video streaming
(3 Mbps and above
recommended). Up to 3
devices may connect to the
system at the same time.
Enter the following information:
Enter the NVR’s
Client Port
(default: 35000)
Enter the NVR’s
user name
(default: admin)
Enter the secure
password you
created for the
NVR
e
All connected cameras are shown
on screen in the FLIR Client 12 home
screen.
NOTE: For full instructions on how to
use the FLIR Client 12 software for PC
and Mac, see your NVR’s instruction
manual at lorextechnology.com.
HD Network Video Surveillance Recorder
LNK7000 Series
Quick Networking Guide