User Guide

3-1 Manage your waypoints list (WAYPOINT)
• You can store a maximum of 200 waypoints with their LL positions. When your waypoint
list is full, you cannot make a new entry until you have deleted an existing entry
• Each waypoint name can have a maximum of 6 alphanumeric characters
• Waypoints are stored in order of entry, with the most recent entry shown first
• The waypoints are displayed in columns of 6 with a box. Rotate the Channel Select knob
to scroll through the columns to easily locate your desired waypoint. Then press ENT and
use the Channel Select knob to select a waypoint within the column.
3-1-1 Add a new waypoint
MENU SELECT
►WAYPOINT
BACKLIGHT
BUDDY LIST
LOCAL/DIST
▼
WAYPOINT
►WP LIST
NEAREST WP
TEMP
WP LIST
NEW WP R14W05
R01W02 R14W04
R01W01 R14W03
ENTER WP
. N
. W
ENTER WP
R01W03
17
32.233 N
160
45.651 E
SAVE
►YES
NO
WP LIST
NEW WP R01W01
R01W03 R14W05
R01W02 R14W04
1. Select WAYPOINT then WP LIST.
2. Your waypoint list is displayed. Press ENT.
3. NEW WP starts to flash. Press ENT to add a new waypoint.
4. Enter a waypoint name (maximum 6 characters), then the latitude, then the longitude.
5. Press ENT when all the information is correct then select YES.
The new waypoint is saved and your waypoint list is displayed again.
3-1-2 Edit or delete a waypoint
MENU SELECT
►WAYPOINT
BACKLIGHT
BUDDY LIST
LOCAL/DIST
▼
WAYPOINT
►WP LIST
NEAREST WP
TEMP
WP LIST
NEW WP R14W05
R01W02 R14W04
R01W01 R14W03
R14W05
►WP EDIT
DELETE
GO
TX WPT DATA
WP EDIT
R14END
17
32.233 N
160
45.651 E
SAVE
R14END
►YES
NO
WP LIST
NEW WP R01W01
R01W03 R14END
R01W02 R14W04
1. Select WAYPOINT then WP LIST.
Lowrance - Link-8 Operation Instructions18