User Guide

Note: A valid GPS signal must be received to see parts of this selection.
2. Your waypoint list is displayed. Press ENT.
3. NEW WP starts to flash. Scroll down to the incorrect entry. The selected waypoint
flashes. Press ENT again.
4. To delete the waypoint, select DELETE then YES. The waypoint is deleted immediately
and the waypoint list is refreshed and displayed again.
5. To edit the waypoint, select WP EDIT. The cursor is at the first character of the name. Edit
the waypoint name or to edit only the latitude or longitude, press ENT repeatedly until
the cursor moves to the required line.
6. When you are finished, press ENT (repeatedly if necessary) until an updated page
appears.
7. Press ENT to store the changes. The waypoint list is displayed again. If more changes are
required, repeat steps 2 through 6. Otherwise, press EXIT to cancel any edits.
3-1-3 Go to a new waypoint
MENU SELECT
►WAYPOINT
BACKLIGHT
BUDDY LIST
LOCAL/DIST
▼
WAYPOINT
►WP LIST
NEAREST WP
TEMP
WP LIST
NEW WP R14W05
R01W02 R14W04
R01W01 R14W03
R01W01
WP EDIT
DELETE
►GO
TX WPT DATA
1. Select WAYPOINT then WP LIST.
2. Your waypoint list is displayed. Press ENT.
3. NEW WP starts to flash. Scroll down to the waypoint you want to go to. The selected
waypoint flashes. Press ENT again.
4. Select GO.
5. Select Yes. The waypoint is set immediately as the destination waypoint.
Tip: If you are in the NAV big number screen, just turn the Channel Select knob to
immediately access the Waypoint List. Select the new waypoint and press ENT.
3-1-4 Go to nearest waypoint (NEAREST WP)
Note: A valid GPS signal must be received to see this selection.
MENU SELECT
►WAYPOINT
BACKLIGHT
BUDDY LIST
LOCAL/DIST
▼
WAYPOINT
►WP LIST
NEAREST WP
TEMP
NEAREST WP
►R01W04 001
98
R01W01 003
136
1. Select WAYPOINT then NEAREST WP.
2. Press ENT to display the nearest waypoint with distance and bearing from your current
position.
Other waypoints are listed in increasing distance from your current position.
Lowrance - Link-8 Operation Instructions 19