Installation Instructions

23
The four yellow wires (Aces-
sory Wake Up lines) from
each power cable should be
wired together.
Ethernet cables
Multiple unit wiring diagram with devices
Fuse and fuse holder. The
red wire from each power ca-
ble should be fused between
the device and the battery.
NEP-1
LBS-1
The diagram above shows two HDS units and an LBS-1 connected via an
NEP-1. The power cable from each device contains a yellow wire. The yellow
wire is the Accessory Wake Up line. Connect the yellow wires together. When
the Accessory Wake Up line is used to connect units with the accessory wake
up feature, you can power up certain connected devices from one location,
including digital sonar optimizers and expansion ports.