Installation Instructions

5
3. Assembling the Transducer bracket
After determining the correct position for the ratchets, loosely assemble the trans-
ducer and bracket assembly as shown in one of the two diagrams below.
One-piece bracket assembly:
Do not tighten the transducer bracket assembly until you have aligned the
transducer and bracket on the transom.
Two-piece bracket assembly:
Do not tighten the transducer bracket assembly until you have aligned the
transducer and bracket on the transom.
Metal washer
Lock nut
Rubber washers
Bolt
Metal washer
Ratchets
Ratchets
Bolt
Small at washer
Thick rubber washer
Lock nut
Large at
washer