Manualshelf

Logic Switch User Manual

ManualsBrandsLSI ManualsSwitchSAS6160
51525354555657585960
Page 58 LSI Corporation | September 2010
LSISAS6160 SAS Switch User GuideChapter 3: SAS Domain Manager Graphical User Interface
| Devices Tab
3.7.6.4 Configure IP Use the Configure IP command to change the IP address for the LSI SAS2 switch that is
currently selected in the device tree. You can set either a static or a dynamic IP address
as shown in the following figures.
Figure 23: Set a Static IP Address
Figure 24: Set a Dynamic IP Address