Installation & Assembly

42” Barn Door Track Extension Kit
For the 42” Barn door, it is necessary to use the track extension included in your Barn door kit.
Kit Includes
2 Ea.
2 Ea.
2 Ea.
2 Ea.
2 Ea.
1 Ea.
To attach the extender, lay the track on the oor. Slip the extender (R1) onto the end of the track where
the door will be in the open position. It is important that the side of the track extender with the lip is
facing to the top. Begin tightening the 2 screws with the allen wrench (See Figures 1A & 1B). Use the
level to be sure the track and extender are straight and then fully tighten (See Figure 2) .
Turn the track and extender over, use the allen wrench to tighten the 2 remaining screws. Use the level
one more time to check the track is straight and then fully tighten the screws.
The extended track is now ready to install. Please refer to the Instructions for your Barn door kit for
proper installation.
IMPORTANT: It is important to read all instructions before you begin installation. A mounting board is
recommended and must be installed prior to hanging the track and door.
Figure 1A
Door opening to
the right
Top
Top
Top
Level
Figure 2
1 Ea.
Tools Needed
Level
Figure 1B
Door opening to
the left
Top
Top
Top