Instructions / Assembly

Climate Installation Instructions
4 | P a g e
HANGING THE FAN
Pass the power supply wires (C) from the ceiling outlet box (B) through the center of the ceiling mounting
bracket (D). Install the ceiling mounting bracket (D) on the outlet box (B) with the mounting screws (F) provided
with the outlet box and washers (E) provided with fan. Fig. 6
Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is positioned
on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. Fig.7
ELECTRICAL WIRING DIAGRAM
WARNING: To avoid possible electrical shock, be sure you
have turned off the power at the main circuit panel.
Follow the steps below to connect the fan to your household
wiring. Use the wire connecting nuts supplied with your fan.
Secure the connectors with electrical tape. Make sure there are
no loose wire strands or connections.
1. Connect the household live supply wire (black) to EMI
filter input wire (black, AC IN L) as shown in Fig. 8.
2. Connect the household neutral supply wire (white) to the
EMI filter input wire (white, AC IN N).
3. Connect the household ground wire to the fan ground
wire (green). Connect the ground wire connectors together.
4. Connect the EMI filter output wire (black, TO MOTOR L)
to motor live input wire (black, TO MOTOR L).
5. Connect the EMI filter output wire (white, TO MOTOR N)
to motor neutral input wire (white, TO MOTOR N).
6. After connecting the wires, spread them apart so that the
green and white wires are on one side of the outlet box and the
black and blue wires are on the other side.
7. Turn the connecting nuts upward and push the wiring into
the outlet box.
Fig. 6
Fig. 7
Fig. 8