Instructions / Assembly

Climate II Installation Instructions
9 | P a g e
REPAIRING THE FAN RECEIVER & REMOTE PAIRING
Should the remote and receiver lose control after installation or during use, the pairing of the remote
and the receiver must be repaired. Below are the operating symptoms and method to repair the pairing
of the DC ceiling fan remote and receiver.
Issues:
⚫ Loss of control - Fan is only running at high speed after installation
⚫ Loss of control - No reverse function after installation
⚫ Loss of control - Remote cannot communicate with receiver
Solution:
A. Switch OFF the main power to the ceiling fan for 30 seconds.
B. Press and hold the “SET” button on remote for 6 seconds within 60 seconds of switching the power ON
to the receiver of the ceiling fan.
While pairing the DC fan remote and receiver is in process, the fan will automatically start to rotate in the
counterclockwise direction and on the highest RPM for 3 minutes. When counterclockwise rotation has
finished, the fan will automatically reverse to clockwise direction again to the highest RPM for 3 minutes.
Fan will turn off when the pairing process has finished. During the pairing process, the remote is non-
functional.
C. Turn ON and change the speed of the ceiling fan via the transmitter to check the operation and successful
pairing.
INSTALLING THE TRANSMITTER HOLDER
Remove the cover (A) from the holder (B). Attach the holder (B)
with the two screws provided (C).
Replace the cover (A) into holder (B). Fig. 15
Fig. 15