User's Manual

Quick Reference
MDW 9031/9031DCP Wireless Pocket Phone Quick Reference
503-801-1658 Issue 2 February 1999
Changing Settings or Performing Tests in Local Mode
1
Make sure the handset is turned off.
2
Press and hold
"
for 3 seconds.
3
While still holding
"
, press
O
.
4
Press one of the following:
A
(2) to enable or disable the alerter.
L
(5) to enable or disable backlighting.
P
(7) for 3 seconds, then " to enable or disable
Line Preselection.
V
(8) to enable or disable the vibrator.
W
(9) to enter Wireless Test Mode, then 1 for signal strength 2
for voice quality 3 for matching radio module and slot number 5
for handset power settings # to enter Local Test Mode.
5
Press
O
to exit.
!
CAUTION:
The MDW 9031/9031DCP handset is a radio device and, like all radio
devices, should not be placed next to a pacemaker. See “Guidelines
for Safe and Efficient Operation” in the MDW 9031/9031DCP Wireless
Pocket Phone Installation and Use guide for more information.
qrtitle.book Page 8 Friday, December 18, 1998 9:52 AM