Instructions

EN
LUCTRA | 17
English
Product-specific safety instructions
• Do not cover the lamp with cloths or other objects. This may cause a fire hazard.
• Always remove the lamp from the mounting first before transporting or repositioning the
lamp.
• Always unplug the lamp before changing the position of the table-top base.
• Never open the VITACORE
®
control panel. The lamp will suffer irreparable damage.
Explanation of symbols
• Warning signs on your lamp must not be removed or covered.
Read and observe the user manual before starting to use the lamp.
Risk of eye damage! Never look directly into the LEDs.
You must only use the lamp in dry indoor rooms.
Replace any protective panel that is cracked. The light source is located behind a
protective panel that protects the user against burns and the LEDs against damage. It
is not permitted to operate the lamp without the protective panel or with a damaged
protective panel. The protective panel must be replaced by a new, undamaged protec-
tive panel (original part).
Product and functional description
LUCTRA
®
provides biologically effective light where the light colour can be varied between a
cold white light with a high blue content and a warm white light with a high red content. Cou-
pled with its high light intensity, LUCTRA
®
gives your body the clear light signals that it needs
to adapt its internal body clock and thus to its biological rhythm during the course of the day.
The better this works, the higher your sense of well-being and the better your performance.
The optimum biological effectiveness is achieved if the light colours vary significantly during the
course of the day. We therefore recommend having very cold white light in the mornings that is
reduced at lunchtime, then slightly increased again after lunch and then continuously reduced
in the afternoon. The red content should prevail in the evening. You can change these settings
on the VITACORE
®
control panel at any time. Ultimately your well-being is determined by the
light setting that is right and comfortable for you. Therefore, experiment with different settings
until you have found the right one for you. You can use the VITACORE
®
App to adjust the setting
of the light colour automatically (▶see “Operating the app” on page22).
The boost function provides short-term activation of light with the maximum blue content and
maximum brightness. This can be useful in situations requiring a high degree of concentration.
As this light setting works intensively when used continuously, it is automatically terminated
after 30 minutes.
You can find out more about the combinations and effect of biological light at www.luctra.eu.
Your lamp at a glance
▶see image1
1. Lamp head
2. Protective panel
3. VITACORE
®
control panel (touch screen)
4. Table-top base