Instructions

EN
LUCTRA | 21
English
Adjusting the lamp
NOTICE!
Risk of damage to the lamp!
Do not rotate the lamp head against the resistance in the swivel joint.
Operation
NOTICE!
Risk of property damage!
The lamp head is designed in such as way that the LEDs can be ideally cooled, thus
achieving a long service life.
Never cover the lamp head. This may cause a fire hazard.
You can adjust the settings on the VITACORE
®
control panel or through the VITACORE
®
app on
your smartphone or tablet PC.
Operating the VITACORE
®
control panel
▶see image7
21. On-Off touch button
22. Touch buttons to adjust the light intensity
23. Boost touch button
24. Touch buttons to adjust the light colour
25. USB charging ports
Note:
The touch button symbols to adjust the light colour, light intensity and boost function
are only visible once you have briefly tapped the On-Off touch button(21).
The symbols fade again if you have not tapped the user interface for a few seconds.
The duration set for the lighting on the VITACORE
®
control panel can be adjusted in
the VITACORE
®
App. The preset duration for the lighting is 30 seconds.
– Tap the
On-Off touch button to switch the light on or off.
– Tap the touch button to reduce the light intensity.
– Tap the touch button to increase the light intensity.
– Tap the touch button to make the light colour warmer (reddish).
– Tap the touch button to make the light colour colder (bluish).
– Tap the boost touch button to activate maximum light intensity of the cold white LEDs.
Note:
The boost function is terminated automatically after 30 minutes.
• The boost touch button symbol flashes when the function is activated.
– Terminate the boost function prematurely by tapping any touch button.
• If the boost function has terminated or the 30 minutes have expired, the VITACORE
®
con-
trol uses the preset values.