Datasheet

ManualsBrandsLUMEL ManualsPanel-Mount InstrumentsEA19 400V

LUMEL S.A., ul. Słubicka 1, 65-127 Zielona Góra, Poland / tel.: +48 68 45 75 139/276/305/386, fax: +48 68 32 54 091 / e-mail:export@lumel.com.pl /

www.lumel.com.pl

EA16, EB16, EA17, EA19 and EA12 moving-iron meters are intended

for measuring AC voltage or AC current. These meters measure the

true RMS value and their indications are highly independent of the

measured value curve shape.

EA16, EA17, EA19 and EA12 meters are designed for mounting into

panels. EB16 meters are adapted for a fast assembly rail mounting

(35 mm rail) in compliance with EN 60715 standards.

EA16, EA17 and EA19 meters are designed to interchangeable

dials.

TECHNICAL DATA

Accuracy class 1.5

Measured value frequency 40...45...65...72 Hz

Execution of ammeters normal scale version or version with

100% overload. Other overcurrent

scale, on request after agreement.

Self-consumption see table 1

Matching the measurement

range of the meter to

transformer ranges by exchange of the dial. The dial is

put forward the slot in upper case

side.

Note: EA12 (144 x 144) meters are

not provided for interchangeable

dials

CATEGORIES OF METER CLIMATIC VERSIONS

If it is not written otherwise in the order, these meters are inten-

ded to use in moderate climatic conditions. Then, we do not place

any symbol on the scale. On customers’ request, meters can be

adapted to use in conditions of a dry or wet tropical climat.

Then, they are marked with the T III symbol.

EA17 and EA19 meters (ammeters and voltmeters) destined to be

used in ambient temperature up to 75°C or higher, are only available

after a previous agreement with the manufacturer.

Requirements concerning safety acc.EN 61010-1 standard:

For EA16 and EB16 meters and meters with rectifiers:

- maximal phase-earth

working voltage 600 V

- installation category II

- pollution degree 2

For EA17, EA19 and EA12 meters:

- maximal phase-earth

working voltage 600 V

- installation category III

- pollution degree 2

Protection Grade acc. to EN 60529

l in standard option:

- IP 50 for EA16, EA17, EA19, EA12 meters

- IP 54 (only for EA12 meter)

- IP 52 (only for EB16 meter)

l with IP 65 front protection grade (on request):

- for EA16, EA17, EA19 meters

l IP 20 terminal protection (with a terminal protective cover)

Case material thermoplastic material

Meter glass material glass

Additional setting pointer

On customers’ request EA17 and

EA19 meters can be equiped with

an additional setting red pointer

fixed in the glass.

Exchanging of dials

(only EA16, EA17,

EA19 meters) extract the dial, on top of the

meter with a suitable tool. After

exchanging the dial, carefully

close the opening with the cover.

The meter must be switched off

during the exchange procedure.

ACCESSORIES

We deliver with the meter:

- screw holders (for IP50 or IP54 option) ..... 2 pcs

- screw holders (for IP65 option) ................. 4 pcs

- spring holders (only for EA16) ................... 2 pcs

- terminal protection cover ........................... 1 pc

We can also deliver on request, current and voltage transformers

EA16EA17EA19EA12 EB16

MOVING-IRON METERS

EA16, EB16, EA17, EA19, EA12 TYPES

AMMETERS and VOLTMETERS

Summary of content (5 pages)

PAGE 1
MOVING-IRON METERS EA16, EB16, EA17, EA19, EA12 TYPES AMMETERS and VOLTMETERS EA12 EA19 EA16, EB16, EA17, EA19 and EA12 moving-iron meters are intended for measuring AC voltage or AC current. These meters measure the true RMS value and their indications are highly independent of the measured value curve shape. EA16, EA17, EA19 and EA12 meters are designed for mounting into panels. EB16 meters are adapted for a fast assembly rail mounting (35 mm rail) in compliance with EN 60715 standards.
PAGE 2
AC CURRENT AND AC VOLTAGE DIRECT MEASUREMENT RANGES Frontal frame dimensions [mm] 48 x 48*) 72 x 72 96 x 96 144 x 144 42 61 95 160 Scale length [mm] Weight [kg] Type Table 1 0.15 0.2 0.25 0.4 EA16, EB16 EA17 EA19 EA12 Self-consumption  10% Measuring range 100 mA 0.43 VA 0.20 VA 0.20 VA 0.48 VA 150 mA 0.46 VA 0.37 VA 0.37 VA 0.46 VA 250 mA 0.44 VA 0.31 VA 0.31 VA 0.38 VA 400 mA 0.43 VA 0.40 VA 0.40 VA 0.48 VA 600 mA 0.
PAGE 3
MEASURING RANGES WITH MEASURING TRANSFORMERS Table 2 Ammeters Measuring range Voltmeters Transformer Measuring range Transformer 1 A - 1/1 4 kV 5 A 5/5 5/1 6 kV 3000/100 V 6000/100 V 6 A 6/5 6/1 10 kV 10 000/100 V 6 A 5/5 - 15 kV 15 000/100 V 10 A 10/5 10/1 20 kV 20 000/100 V 15 A 15/5 15/1 40 kV 30 000/100 V 20 A 20/5 20/1 60 kV 60 000/100 V 30 A 30/5 30/1 150 kV 150 000/100 V 40 A 40/5 40/1 250 kV 250 000/100 V 50 A 5
PAGE 4
Fig.2. External dimensions of EA16 meters a) with screw holders, b) with spring holders Typ a EA17 EA19 EA12 b c d mm 72 96 144 5 5 6 4 4 4,5 68-0,3 92-0,3 137,3-0,5 e f g 45 45 48 10... 20 10... 20 10... 20 20,5 32,5 55,5 k 68+0,7 92+0,8 138+1,0 Fig.3. External dimensions of EA17, EA19, EA12 meters METER Typ a b k EA16 58 47 47,2+0,6 EA17 81 70 70,2+0,7 EA19 105 94 94,2+0,8 SEAL GLASS Fig.4. External dimensions of meters with IP 65 protection grade LUMEL S.A., ul.
PAGE 5
FASTENING ON PANELS  EA16 meters The meters are adapted to be mounted from the front of panels and then they are equiped with two spring holders, which can be fixed on arbitrary opposite case sides (Fig. 2b) or to be mounted from the rear of panels and then they are equiped with two screw holders which can be fixed on arbitrary, opposite case corners (Fig. 2a).