Manualshelf

Installation & Assembly

ManualsBrandsLuminance Brands ManualsBlack Blades Ceiling Fans3 - Blade Outdoor LED Standard Ceiling Fan with Remote Control and Light Kit Included
11121314151617181920
6. No-Light Plate Assembly (Continued)
14
FAN MOTOR
ASSEMBLY WHITE
WIRE CONNECTOR
LIGHT KIT ASSEMBLY
WHITE WIRE CONNECTOR
LIGHT KIT ASSEMBLY DRIVER
AND ARRAY CONNECTORS
Figure 24
6.4
Disengage the white wire connector from the fan motor
assembly to the Light Kit Assembly white wire connector
(Figure 24).
Retain the Light Kit Assembly in a safe place for
possible future reinstallation.
Tuck the fan motor assembly wires and connectors into
the Light Kit Adapter adapter prior to assembling the
no-light plate.
6.5
Place the no-light plate into the opening of the Light Kit
Adapter, aligning the three flat areas on the top edge of
the no-light plate with the three raised dimples on the
Light Kit Adapter and turn the plate clockwise until it
stops (Figure 25).
NOTE: Periodically check that the no-light plate is
seated fully clockwise in the Light Kit Adapter.
H
LIGHT KIT
ADAPTER
RAISED
DIMPLES (3)
FLAT AREA OF
NO-LIGHT PLATE
NO-LIGHT PLATE
ROTATE
CLOCKWISE
Figure 25
Page 14