Installation & Assembly

23
9. Reverse Switch Operation
REVERSING
SWITCH
Figure 47
9.1
Restore electrical power to the outlet box by turning the
electricity on at the main fuse box.
All fans are shipped from the factory with the reversing
switch positioned “left” to circulate air downward.
If airflow is desired in opposite direction, turn your fan
OFF and wait for the blades to stop turning, then slide
the reversing switch to the “right” position, and turn fan
on again (Figure 47).
The fan blades will turn in the opposite direction and
reverse the airflow.
Reverse Switch Information
Season Rotation Direction Switch Position
Summer Counter-Clockwise Left
Winter Clockwise Right
8. Light Kit Assembly Replacement (Continued)
8.17
Reconnect the fan motor assembly black wire connector
into the black wire connector of the Light Kit Assembly
(Figure 46). The connection is complete when you hear
a soft click.
Reconnect the fan motor assembly white wire connector
into the white wire connector of the Light Kit Assembly
(Figure 45). The connection is complete when you hear
a soft click.
8.18
Install Repaired Light Kit Assembly by Following Steps
8.3 through 8.2.
8.19
Restore electricity and verify function of the light kit.
FAN MOTOR
ASSEMBLY
BLACK WIRE
CONNECTOR
LIGHT KIT ASSEMBLY
BLACK WIRE CONNECTOR
FAN MOTOR ASSEMBLY
WHITE WIRE CONNECTOR
LIGHT KIT ASSEMBLY
WHITE WIRE CONNECTOR
Figure 46
Page 23