Installation & Assembly

TROUBLE PROBABLE CAUSE SUGGESTED REMEDY
1. Fan will not start. 1. Loose power line connections to the fan, 1. Check line wire connections to fan and switch
or loose switch wire connections in the wire connections in the Light Kit Adapter.
Light Kit Adapter.
2. Reversing switch in neutral position. 2. Make sure reversing switch position is all the
way to one side.
2. Fan sounds noisy. 1. Blades not attached to fan. 1. Attach blades to fan before operating.
2. Wire connectors inside Light Kit 2. Check to make sure wire connectors in Light
Adapter are rattling. Kit Adapter are not rattling against each other or
against the interior wall of the Light Kit Adapter.
3. Screws holding blades to motor hub 3. Tighten screws securely.
are loose.
3. Fan wobbles 1. Setscrews in motor coupler are loose. 1. Tighten both setscrews securely in the motor coupler.
excessively.
2. Setscrew in hanger ball/downrod 2. Tighten the setscrew in the hanger ball/downrod
assembly is loose. assembly.
3. Screws securing fan blades to 3. Check to be sure screws which attach the fan blades
motor hub are loose. to the motor hub are tight.
4. Hanger bracket and/or ceiling outlet 4. Tighten the hanger bracket screws to the outlet box,
box is not securely fastened. and/or secure outlet box.
27
15. Troubleshooting
FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE
TROUBLESHOOTING YOUR FAN.
WARNING
!
Make sure main power is turned OFF.
WARNING
!
Make sure main power is turned OFF.
WARNING
!
Page 27