User's Manual

ALDER SIMPLE
10
1-855-999-7872
At the end of the countdown, the system will announce “System
armed stay”, the panel status field will now display “I’m armed in
stay mode.”, and the system will be armed.
ARM THE SYSTEM (AWAY MODE)
Select this mode when the house will be unoccupied. This mode
will arm ALL anti-burglary sensors (doors, windows, motion
sensors, glass break sensors) that have not been bypassed.
To arm Away, tap “Arm Away”. Your system will announce
“Arming Away”.
If you want to silently arm your system without audible
announcements or the countdown-beeping tap “Silent Exit” at
the bottom left of the home screen or the bottom middle of the
arming screen (image above).
When arming in Away mode and Silent Exit is Off, the countdown
will be accompanied by beeps. You can turn the beeps off mid
countdown by tapping “Silent Exit”. Tapping “Silent Exit” will extend
the countdown length as will opening a door one time
if you need to re-enter the location. You also have the option to
cancel the arming process by tapping “Cancel” and entering a
User Passcode or add 30 seconds to the countdown length by
tapping “Add 30 sec.”
Auto Stay Mode: If for any reason a door sensor is not opened
during the Exit Delay countdown, the system will default to Stay
Mode. This is to prevent the central monitoring station from
receiving false alarms.
BYPASS SENSORS
When you open a door or window that is protected by a sensor,
your home screen will turn yellow and the system status will read,
“Hang on, your sensor is open”. Before you can arm the system
you must either close all open sensors or bypass them.