User's Manual

USER MANUAL
13
WWW.ALDER.COM
hostage code simply enter it to disarm your panel.
FIRE DETECTION
Your Smoke+CO or Smoke/Heat/Freeze sensors are armed at all
times by default. Smoke, Heat, or Freeze detection can be disabled
in the individual Smoke/Heath/Freeze sensor settings. In order to
prevent false alarms, fire protection sensors also have the option of
Fire Verification which requires the sensor to be violated twice in
two minutes, or remain violated for 30 seconds. By default, this
setting is turned off. The setting can be adjusted in the individual
sensor settings. (see Fire Alarm Verification on page
22).
IN THE EVENT OF A FIRE ALARM
If your Smoke or Heat sensor is triggered the following will occur:
The alarm siren will sound and continue to sound for four minutes
or until a User Passcode is entered. Once the Central Monitoring
Station receives the Fire Signal they will act according to the pre-
determined action plan. The Central Monitoring Station WILL NOT
call the panel. You and all others in the house should exit the
premise immediately and call 9-1-1.
CARBON MONOXIDE DETECTION
If your Carbon Monoxide (CO) sensor is triggered the following will
occur: The alarm siren will sound and continue to sound for four
minutes or until a User Passcode is entered. Once the Central
Monitoring Station receives the Carbon Monoxide Signal they will
act according to the pre-determined action plan. You and all
others in the house should exit the premise immediately.
FLOOD DETECTION
Your Flood Sensor is armed at all times.
IN THE EVENT OF A FLOOD ALARM
If your Flood sensor is triggered the following will occur:
The alarm siren will sound and continue to sound for four minutes
or until a User Passcode is entered. The Central Monitoring
Station will contact you and your emergency contacts by the pre-
determined method (panel, phone call, email, text, app notification).