User's Manual

USER MANUAL
21
WWW.ALDER.COM
REMOTES
Your Remote can be used to arm and disarm your panel from a
distance or send an emergency signal. The Remote command
buttons will function as long as the remote is within 100 feet of
the panel. There are four buttons on the Remote: Away, Stay,
Disarm, and SOS.
AWAY BUTTON
Pressing and holding the Away Button for three seconds will Arm
your alarm in Away mode and start the Exit Delay countdown.
Unless muted the panel will announce “Arming Away”.
STAY BUTTON
Pressing and holding the Stay Button for three seconds will Arm
your alarm in Stay mode and start the Exit Delay countdown.
Unless muted the panel will announce “Arming Stay”.
DISARM BUTTON
Pressing and holding the Disarm Button for three seconds will
Disarm your system. Unless muted the panel will announce
“System Disarmed”.
SOS BUTTON
Pressing and holding the SOS button for two seconds 2x (twice)
within 10 seconds will trigger the alarm and send an emergency
signal to the Central Monitoring Station.
TURN SOS BUTTON ON/OFF
To Turn a Remote’s SOS button On or Off go to Settings > Enter
your 4-digit Master Code > Sensors > Remotes > tap “Edit” on the
row of the remote for which you wish to change the SOS button >
on the “SOS button” row tap “ON” or “OFF”. Turning your SOS
button “OFF” will disable the button. Pressing the red SOS button
on your remote WILL NOT trigger your alarm or send an
emergency signal to the Central Monitoring Station if your SOS
button setting is set to “OFF”.
CHANGE REMOTE BATTERY
To change the battery of a Remote, remove the screw on the back
of the Remote and open the cover. The Remote requires one
CR2032 battery.