User's Manual

ALDER SIMPLE 28 1-855-999-7872
use “+” and “-” to adjust the panel volume. This changes the
volume of voice announcements and chimes. You can also adjust
the Panel Volume by using the “+” and “-” buttons in the bottom
right corner of the Home screen.
TURN CHIME SOUND ON/OFF (FOR ALL SENSORS)
To turn Chime Sounds On or Off for all of your sensors tap
Settings > Enter your 4-digit Master Code > System > Sounds > on
the “Chime Sound (all sensors)” row tap “ON” or “OFF”.
ADJUST THE TOUCH SCREEN VOLUME
To adjust Touch Screen Sound Volume, tap Settings > Enter
your 4-digit Master Code > System>Sounds > on the “Touch
Screen Sound” row use “+” and “-” to adjust the volume of the
clicking noise when the screen is touched.
TURN VOICE SOUND ON/OFF (FOR ALL SENSORS)
To turn Voice Sounds On or Off for all of your sensors tap Settings >
Enter your 4-digit Master Code > System > Sounds > on the “Voice
Sound (all sensors)” row tap “ON” or “OFF”.
CHANGE THE VOICE GENDER (MALE/FEMALE)
To change the gender of the voice announcements tap Settings >
Enter your 4-digit Master Code > System > Sounds > on the Voice
(male/female) row tap “Male” or “Female.”
TEST THE SIREN
To test the Siren tap Settings > Enter your 4-digit Master Code >
System > Sounds > at the bottom of the screen tap “Test Siren.”
EXIT DELAY
ADJUST EXIT DELAY
The Exit Delay is for when you are leaving your home and gives you
time after you arm your alarm to leave the house. The Exit Delay is
defaulted to 60 seconds. The exit delay applies to all sensors. If you
want to change the Exit Delay tap Settings > Enter your
4-digit Master Code > System > Exit Delay > use the “-” and “+” to
adjust the Exit Delay time.
TRANSMISSION DELAY
To prevent false alarms, the panel is defaulted to not transmit an alarm
signal until 30 seconds after the system has been tripped. You can
adjust this time with the Transmission Delay settings. To adjust the
Transmission Delay go to Settings > Enter your 4-digit Master Code >
System > Exit Delay > Transmission Delay > use the