User's Manual

ALDER SIMPLE 30 1-855-999-7872
status of “Verified”. You do not need to wait for one sensor to reach
“Verified” status before triggering another.
The “TEST” button will turn green if all sensors passed the test and
red if there was a problem. Call Technical Support at 885 999-7872
if ALL sensors do not reach “Verified” status.
Your system will automatically be placed in Test Mode for 10
minutes to allow you to complete the test. Your system will
automatically switch back to Active Mode when you have
completed the test, hit the Back or Home buttons, or the ten-
minute test period ends.
SYSTEM INFO
This section displays the system information that may be
needed for technical troubleshooting. To access this information tap
Settings > Enter your 4-digit Master Code > System > System Info.
PANEL INSTALL LOCATION
The panel can be installed on the included stand and placed on a
surface such as a table top, countertop, etc. It can also be installed
on a wall with the optional wall-mounting bracket. Professional
installation is recommended for a wall-mounted panel.
The panel install location is defaulted to “Table”. If the panel is
mounted on a wall, the location should be changed to “Wall” by
tapping Settings > Enter your 4-digit Master Code > System >
System Info > tap “Wall” on the panel install location row.