User's Manual

USER MANUAL
33
WWW.ALDER.COM
User Passcodes
MASTER PASSCODE AND VERBAL PASSWORD
Your Master Passcode is the 4-digit user code you set up in the
installation process and can be used to access system settings.
Your Verbal Password is a word or phrase that you established
when you purchased your system. It is used to verify your identity
when an alarm is triggered or when speaking with Alder Simple
about your account.
SECURE ARMING
When Secure Arming is turned “On” the panel cannot be armed
without first entering a User Passcode. To require a passcode to
be entered to arm your system tap Settings > Enter your 4-digit
Master Code > Tap User Passcodes > on the row with “Secure
Arming” tap “ON”. This feature prevents young children or others
from inadvertently arming your system.
RESET MASTER PASSCODE
To Reset a Master Passcode tap Settings > Enter your 4-digit
Master Code > Tap User Passcodes > Tap Reset on the
Master Passcode row > Enter your new 4-digit Master Code.
Note: If you forget your Master Passcode, call our technical
support line and be prepared to give your Verbal Password.
CREATE HOSTAGE PASSCODE
Unlike your other passcodes, your Hostage Passcode will disarm
your system and send a silent hostage emergency signal to the
Central Monitoring Station.
To create your Hostage Passcode tap Settings > Enter your 4-
digit Master Code > Tap User Passcodes > Tap “Create” on the
Hostage Passcode row > Enter your new 4-digit Hostage
Passcode > Enter your 4-digit Hostage Passcode again > Your
Hostage Passcode is now set up. Remember to only use the
Hostage Passcode in emergencies.