User's Manual

ALDER SIMPLE
6
1-855-999-7872
SYSTEM STATUS
Displays the status of the panel. Possible statuses
include the following:
“Hey, I’m ready to arm.”
“I’m armed in Stay mode.”
“I’m armed in Away mode.”
“Hang on, your sensor is open.”
“Hang on, you have multiple sensors that are open.”
SETTINGS
Tap settings and enter your 4-digit Master Code to view and
change your system settings.
MESSAGES
Tap the envelope to view messages. For more details see
“Messages” on page
39.
SILENT EXIT: ON/OFF
Silent Exit is defaulted to “OFF” meaning the panel will beep
during the Exit Delay Countdown when arming Away. (See ‘Arm
the System (Away Mode)’ on page
10). When “Silent Exit” is
“ON” the panel will not beep when arming Away.
CHECK STATUS
(Seen whenever a sensor is open) – tap ‘check status’ to see the
status of all sensors.
PANEL VOLUME
Volume can be adjusted using “- “and “+”. This is the volume
of the chimes and voice. The volume ranges from “0” (off) to
“10” (maximum).
ARM STAY
Arm Stay is used to arm the system when people will be staying
inside. Tapping Arm Stay begins a countdown called the “Exit
Delay”. When the countdown ends, the premises’ doors and
windows will be armed and the motion sensors (with default
settings) will remain disarmed. For more information, see “Arm
the System (Stay Mode)” on page
9.
ARM AWAY
Arm Away is used to arm the system when the home will be
unoccupied. Tapping Arm Away begins a countdown called the
“Exit Delay”. When the countdown ends, ALL sensors will be armed.
For more information, see “Arm the System (Away Mode)” on page
10.