User's Manual

USER MANUAL
9
WWW.ALDER.COM
Alarm
INTRUSION DETECTION
In order to arm your system to detect intrusions ensure the panel
status field says, “Hey, I’m ready to arm.” Then arm the system in
Stay or Away mode.
ARM THE SYSTEM (STAY MODE)
Select this mode when people will be staying inside. This mode
arms your doors and windows and leaves the motion sensors
(with default settings) disarmed.
To arm Stay, tap “Arm Stay”. Your system will announce “Arming
Stay”.
Select this mode when the house will be occupied. This mode will
arm ALL anti-burglary sensors except Motion sensors, that have
not been bypassed. During the arming countdown you have the
option to add 30 seconds to the countdown, or tap cancel which
will prompt you to enter your User Passcode to disarm the system.
If you want to silence the countdown-beeping tap the “Silence”
button at the bottom of the arming screen.
Another option is “Night Mode” which will immediately arm your
system and remove any Entry Delay that is set on your door or
motion sensors. This mode is typically used at night when there is
not a reason to have an Entry Delay.