Full Product Manual

Maestro Sensor
369666h 3 02.12.21
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Switch with Occupancy / Vacancy Sensor
Custom Settings
Ambient Light Detection
Lights turn on only if natural light in room is low.
• Smart—Ambient light threshold adjusts precisely to
the user’s preference.
Instructions: If switch turns on when there is enough natural light, or if
switch does not turn on when there is not enough natural light, press
the large button within 5 seconds of entering the room. Over time, this
interaction will “teach” the switch your preferred setting.
Sensor Operation
• Occupancy / Vacancy: Auto-ON / Auto-OFF or
Manual-ON / Auto-OFF
• Vacancy only: Manual-ON / Auto-OFF only
Timeout Options
(See Additional Features on page 5 for default settings)
• 1 Minute
• 5 Minutes
• 15 Minutes
• 30 Minutes
Sensitivity Options
• High sensitivity (default)
• Low sensitivity
Auto-ON Options
(MS-OPS and UMS-OPS only)
• Occupancy (default): Auto-ON / Auto-OFF
• Vacancy*: Manual-ON / Auto-OFF
• Low Light: Lights turn on only if needed (if ambient
light is below threshold)
* There is a 15-second grace period that begins when the lights are
automatically turned off, during which the lights will automatically turn
back on in response to motion. This grace period is provided as a safety
and convenience feature in the event that the lights turn off while the
room is still occupied, so that the user does not need to manually turn
the lights back on. After 15 seconds, the grace period expires and the
lights must be manually turned on.
Manual Off-While-Occupied Options
(MS-OPS and UMS-OPS only — see Additional Features on page 5 for
default setting)
• Enabled
– When the occupancy sensor switch is manually
turned off, the occupancy sensor switch will not
turn the lights back on automatically while the
room is occupied.
– Once the room is vacated, the Auto-ON feature
returns to normal operation after the timeout
period has expired.
– This may be the preference in conference rooms
or classrooms while viewing presentations. This
feature requires motion to keep the lights off.
• Disabled
– When the occupancy sensor switch is manually
turned off, the Auto-ON feature will return to
normal operation after 25 seconds.
– This may be the preference if the user always
wants the lights to turn on upon entering and the
lights to turn off when the room is vacant.
3