Full Product Manual

Maestro Sensor
369666h 9 02.12.21
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Switch with Occupancy / Vacancy Sensor
Continued on next page...
Wiring Diagrams
Single Location Installation (120 V~)
-OPS2 and -VPS2
Wiring Diagram 1- with Neutral
Occupancy
sensor switch
120 V~
50 / 60 Hz
White
Ground
Hot / Live
Neutral
Load
Bare
Black Black
Single Location Installation (120 V~)
1
-OPS5M, -OPS6M2-DV, -VPS5M, -VPS6M2-DV
Wiring Diagram 2 - with Neutral
120 V~
50 / 60 Hz
White
Ground
Hot / Live
Neutral
Load
Blue
1
Bare
Black Black
Occupancy
sensor switch
Single Location Installation (120 V~)
-OPS2 and -VPS2
Wiring Diagram 1- without Neutral
Occupancy
sensor switch
120 V~
50 / 60 Hz
Green-sleeved wire
Ground
Hot / Live
Neutral
Load
Bare
Black Black
1
When using controls in single location installations, tighten the blue terminal or cap blue wire. Do not connect the blue terminal / wire to any other
wire or to ground.
2
Only one occupancy sensor switch can be used per multi-location circuit.
3
A single standard mechanical 3-way switch or up to 9 companion switches may be connected to most occupancy sensor switches.
Standard mechanical 3-way switch cannot be combined with companion switch. Total blue terminal wire length may be up to 150ft (46m).
Single Location Installation (120 V~)
1
-OPS5M, -OPS6M2-DV, -VPS5M, -VPS6M2-DV
Wiring Diagram 2 - without Neutral
120 V~
50 / 60 Hz
Green-sleeved wire
Ground
Hot / Live
Neutral
Load
Blue
1
Bare
Black Black
Occupancy
sensor switch
Note: Connect green-sleeved wire to ground only in retrofit and
replacement applications.
Note: When a neutral connection is available, remove the green
sleeve and connect the white wire to neutral.
Note: Connect green-sleeved wire to ground only in retrofit and
replacement applications.
Note: When a neutral connection is available, remove the green
sleeve and connect the white wire to neutral.
9