Instructions / Assembly

www.luxorfur n.com

www.hwilson.com

02/05/13

Parts List

Tools Required

Fixed Height Metal Cart

Instructions

AV42, AV34, AV26,

W42, W34, W26

- Rubber Mallet

Position the cart frame A so that the caster

holes are facing up. Insert caster B into the

caster holes on the bottom of A. Use a

mallet to set the casters properly.

Flip cart frame A . Place Non-slip mat on

desired shelf. The cart is now complete.

1 2

Optional cart with

two shelves

Non-slip mat

A x1

B x4

PAGE 1
02/05/13 Tools Required Parts List www.luxorfurn.com www.hwilson.com Fixed Height Metal Cart Instructions -- Rubber Mallet Non-slip mat Optional cart with two shelves AV42, AV34, AV26, W42, W34, W26 A x1 B x4 B A A 1 2 Position the cart frame A so that the caster holes are facing up. Insert caster B into the caster holes on the bottom of A. Use a mallet to set the casters properly. Flip cart frame A . Place Non-slip mat on desired shelf. The cart is now complete.
PAGE 2
02/05/13 Tools Required Parts List www.luxorfurn.com www.hwilson.com Electric Assembly Instructions -- Screwdriver A x1 Number of outlets may vary. B x1 C x2 D D (Plastic or Metal Mounting Surface) B A C 1 Push screw C through electric outlet A. Make sure the electric outlet A and cord wrap B align with the mounting surface screw holes. Push screw C through cord wrap B and the mounting surface screw holes. Use wing nut D and screwdriver to fasten.