Installation & Assembly

LuxorFurn.com/Reclaim

Parts:

Please read all instructions before installation. Choose the desired height of the Panel. Hold Clamp up to

the pre-drilled hole and insert Screw through the Clamp and into the Panel. Make sure that the Clamp is

straight up and down for proper attachment to desk. Use the Allen Wrench to tighten until secure.

Repeat with the other Clamp.

Instructions for the RECLAIM™ Desktop Privacy Panels

Panel Box 1

Clamp Box 1

Clamp x2

Screw x2

Hole Plugs x4

Allen Wrench x1

Clamp Box 2

Clamp x2

Screw x2

Hole Plugs x4

Allen Wrench x1

Desk Panel x1

Panel Box 2

Desk Panel x1

PAGE 1
Instructions for the RECLAIM™ Desktop Privacy Panels Parts: Clamp Box 1 Panel Box 1 Desk Panel x1 Clamp x2 Panel Box 2 Allen Wrench x1 Hole Plugs x4 Screw x2 Allen Wrench x1 Hole Plugs x4 Screw x2 Clamp Box 2 Desk Panel x1 Clamp x2 1 Please read all instructions before installation. Choose the desired height of the Panel. Hold Clamp up to the pre-drilled hole and insert Screw through the Clamp and into the Panel. Make sure that the Clamp is straight up and down for proper attachment to desk.
PAGE 2
Next, take the Hole Plugs and insert them into the remaining holes by pushing firmly until they are secure. LuxorFurn.
PAGE 3
With help, slide the panel onto the desk making sure that the edge of the desk is all the way back inside of the clamp. Tighten the knob on both Clamps until the Panel is secured. Make sure that clamp is attached before installing the Panel to the desk. Repeat steps to attach the second panel. Assistance Recommended LuxorFurn.