Computer Accessories User Manual

Control Panel Options 87
E-EQ-MX5CERG-F-ARC MX5X Reference Guide
Password
Access: | Settings | Control Panel | Password Icon
Set MX5X access/power up password properties.
Factory Default Settings
Password Blank
At Power On Disabled
Screensaver Disabled
Note: Once a password is assigned, each Control Panel option requires the password be
entered before the Control Panel option can be accessed. If you forget the password, it
cannot be restored without performing a cold boot on the unit (which erases everything
in memory).
Enter the password, then type it again to confirm it and tap the OK box to save the changes. The
password is immediately in effect.
Tap the Enable password protection at power on checkbox to set whether the user types a
password at Power On.
Tap the Enable password protection for screensaver checkbox to set whether the user types a
password at Power On.
The screensaver password is the same as the power-on password. They are not set independently.
A screensaver password cannot be created without first enabling the Enable password protection at
power-on checkbox. The screensaver password is not automatically enabled when the power-on
checkbox is enabled.
PC Connection
Access: | Settings | Control Panel | PC Connection
Control the connection between the MX5X and a nearby desktop/laptop computer.
Factory Default Settings
Enable direct connection Enabled
Connect Using ‘USB Default’
Tap the Change Connection .. button to adjust the settings. Then tap the OK button to save the
changes. The changes take effect immediately.
Unchecking the Enable direct connections ….. disables ActiveSync.
Change Connection ….
Tapping Change Connection displays a list of configured ActiveSync connections.