Computer Accessories User Manual

92 Control Panel Options
MX5X Reference Guide E-EQ-MX5CERG-F-ARC
Factory Default Settings
Factory Default Settings
Main
Port 1 Disabled
Port 2 Disabled
Send key messages WEDGE Enabled
Translate Control Codes Disabled
Keys
Left Enter
Right Enter
Advanced (Version 2)
Translate Disabled
Strip Leading 0 characters
Strip Trailing 0 characters
Prefix Disabled
Suffix Disabled
COM Ports (COM1, COM4)
Baud Rate 9600
Parity None
Stop Bits 1
Data Bits COM1 : 8 COM4 : greyed out
Note: If the internal scanner has to be configured to operate at any communication settings
other than 9600, N, 8, 1 and the computer either loses power or a cold boot command is
entered, the Scanner applet must be reconfigured to match the scanner communication
settings.
ActiveSync will not work over a COM port if that COM port is enabled in the Scanner applet as a
scanner input. For example, if COM 1 is being used by the scanner, COM 1 can’t be used by any
other program.