Computer Accessories User Manual

Wavelink Avalanche Enabler Configuration 117
E-EQ-MX5CERG-F-ARC MX5X Reference Guide
File Menu Options
Connect The Connect option under the File menu allows the user to initiate a manual
connection to the Moble Device Server and Avalanche Mobility Center. The
connection methods, by default, are wireless and COM connections. Any updates
available will be applied to the mobile device immediately upon a successful
connection.
Abort Stop transmission.
Settings The Settings option under the File menu allows the user to access the control panel
to locally configure the Enabler settings. The Enabler control panel is, by default,
password protected. The default password is
system
The password is not case-sensitive.
Scan
Config
Note: LXE does not support the Scan Configuration feature on Windows CE
devices.
The Scan Config option under the File menu allows the user to configure Enabler
settings using a special barcode that can be created using the Avalanche
Management Console utilities. Refer to the Wavelink Avalanche Mobility Center
User Guide for details.
Exit The Exit option is password protected. The default password is
leave
The password is not case-sensitive.
If changes were made on the Startup/Shutdown tab screen, then after entering the
password, tap OK and the following screen is displayed:
Change the option if desired. Tap the X button to cancel Exit. Tap the OK button to
exit the Avalanche control panel screen.