Computer Accessories User Manual

118 Wavelink Avalanche Enabler Configuration
MX5X Reference Guide E-EQ-MX5CERG-F-ARC
Avalanche Update using File | Settings
Access: | Avalanche | File | Settings
Use these menu options to setup the Avalanche Enabler on the mobile device. LXE recommends
changing and then saving the changes (reboot) before connecting to the network.
Alternatively, the Mobile Device Server can be disabled until needed (refer to the Wavelink
Avalanche Mobility Center User Guide for details).
Menu Options
Connection Enter the IP Address or host name of the Moble Device Server portion of
the Avalanche Mobility Center Console. Set the order in which serial ports
or RF are used to check for the presence of the Moble Device Server.
Execution Unavailable in this release. LXE recommends using AppLock, which is
resident on each Windows mobile device.
Server Contact Setup synchronization, scheduled Mobile Device Server contact, suspend
and reboot settings.
Startup/Shutdown Set options for Enabler program startup or shutdown.
Scan Config This option allows the user to configure Enabler settings using a special
barcode that is created by the Avalanche Mobility Center Console. Not
currently supported by LXE.
Display Set up the Windows display at startup, on connect and during normal
mode. The settings can be adjusted by the user.
Shortcuts Add, delete and update shortcuts to user-allowable applications.
Adapters Enable or disable network and wireless settings. Select an adapter and
switch between the Avalanche Network Profile and manual settings.
Status View the current adapter signal strength and quality, IP address, MAC
address, SSID, BSSID and Link speed. The user cannot edit this
information.