Computer Accessories User Manual

Wavelink Avalanche Enabler Configuration 125
E-EQ-MX5CERG-F-ARC MX5X Reference Guide
Adapters Tab
Note: LXE recommends the user review the network settings configuration utilities and the
default values in Chapter 5 before setting All Adapters to Enable in the Adapters applet.
Figure 3-35 Adapters Options – Network
Manage Network
Setting
When enabled, the Enabler will control the network settings. This
parameter cannot be configured from the Avalanche Mobility Center
Console and is enabled by default.
Manage Wireless
Settings
When enabled, the Enabler will control the wireless settings. This
parameter cannot be configured from the Avalanche Mobility Center
Console and is disabled by default. This parameter setting does not
apply to Summit Clients only.
Current Adapter Lists all network adapters currently installed on the mobile device.
Primary Adapter Indicates if the Enabler is to attempt to configure the primary adapter
(active only if there are multiple network adapters).
Icon on taskbar Places the Avalanche icon in the Avalanche taskbar that may,
optionally, override the standard Windows taskbar.