Computer Accessories User Manual

Wavelink Avalanche Enabler Configuration 127
E-EQ-MX5CERG-F-ARC MX5X Reference Guide
Use Manual
Settings
When enabled, the Enabler will ignore any network or wireless settings
coming from the Avalanche Mobility Center Console and use only the
network settings on the mobile device.
Properties Icon
Selecting the Properties icon displays the Manual Settings Properties dialog
applet. From here, the user can configure Network, DNS and Wireless
parameters using the displays shown below:
Note: A reboot may be required after enabling or disabling these options.
Network DNS Wireless
Figure 3-37 Manual Settings Properties Panels
For descriptions of these Enabler parameters, refer to Chapter 5 Wireless Network Configuration.
LXE does not recommend enabling Manage Wireless Settings for Summit Client devices.
When you download a profile that is configured to manage network and wireless settings, the
Enabler will not apply the manage network and wireless settings to the adapter unless the global
Manage wireless settings and Manage network settings options are enabled on the Adapters
panel (see Figure titled Adapters Options – Network).
Until these options are enabled, the network and wireless settings are controlled by the third-party
software associated with these settings.