Computer Accessories User Manual

128 Wavelink Avalanche Enabler Configuration
MX5X Reference Guide E-EQ-MX5CERG-F-ARC
Status Tab
The Status panel displays the current status of the mobile device network adapter selected in the
drop down box. Note the availability of the Windows standard Refresh button. When tapped, the
signal strength, signal quality and link speed are refreshed for the currently selected adapter. It
also searches for new adapters and may cause a slight delay to refresh the contents of the drop-
down menu..
Figure 3-38 Status Display
Link speed indicates the speed at which the signal is being sent from the adapter to the mobile
device. Speed is dependent on signal strength.
Troubleshooting Avalanche Enabler
Cold Boot
If a device managed by Avalanche is cold-booted, a warmboot MUST be performed following the
coldboot. Failure to perform the warmboot will leave the device in an undetermined configuration
and it may not perform as expected. If the intention is to stop using Avalanche to manage the
device configuration, please see Enabler Uninstall Process earlier in this section.