Computer Accessories User Manual

eXpress Scan 129
E-EQ-MX5CERG-F-ARC MX5X Reference Guide
eXpress Scan
eXpress Scan may be used for the initial network configuration of the mobile device. Available
configuration parameters can include wireless network settings and the Avalanche Mobile Device
Server Address.
Barcodes are created with the eXpress Config utility. Please refer to Using Wavelink Avalanche on
LXE Windows Computers, available on the LXE manuals CD, for information on eXpress Config.
Depending on the barcode length and the number of parameters selected, eXpress Config
generates one or more barcodes for device configuration.
To use eXpress Scan to configure an LXE device:
1. Start eXpress Scan on the LXE device by double tapping the eXpress Scan icon on the
desktop.
Figure 3-39 eXpress Scan Desktop Icon
2. Enter the barcode password used when the barcode was created, if any.
Figure 3-40 eXpress Scan Password Input
3.
Tap Start.
Barcode 1 must be scanned first. The scanned data is displayed in the “Data” text box.
The password, if any, entered above is compared to the password entered when the
barcodes were created.