Computer Accessories User Manual

E-EQ-MX5CERG-F-ARC MX5X Reference Guide
Chapter 4 Scanner
Introduction
Access: | Settings | Control Panel | Scanner
Set scanner keyboard wedge parameters, enable or disable symbologies from being scanned,
active scanner port, and scan key settings. Assign baud rate, parity, stop bits and data bits for
available COM ports. Scanner parameters apply to the MX5X integrated scanner only. Barcode
manipulation parameters apply to barcodes scanned by the integrated scanner engine only.
Scanner configuration can be changed using the Scanner Control Panel or via the LXE API
functions. While the changed configuration is being read, the Scanner LED is solid amber. The
scanner is not operational during the configuration update.
Determine Your Scanner Software Version
Note: Scanner control panel options are based on the installed software version levels, driver
and OS versions in MX5X devices. Your Scanner options may or may not be as described
in this section. To identify the current software version, go to Start | Settings | Control
Panel | Handheld.
If the Scanner Control panel looks like this . . . . Go to . . . .
or
Chapter 3 System
Configuration, section
titled
This chapter