Computer Accessories User Manual

ManualsBrandsLXE ManualsComputer AccessoriesMX5X

151

152

153

154

155

156

157

158

159

160

Factory Default Settings 135

E-EQ-MX5CERG-F-ARC MX5X Reference Guide

Factory Default Settings

Main

Port 1 Disabled

Enable Internal Scanner Sound Enabled

Send Key Messages (WEDGE) Enabled

Output Enable Disabled (Dimmed)

Port 2 Disabled

Enable Internal Scanner Sound Enabled

Send key messages WEDGE Enabled

Output enable Disabled (Dimmed)

Keys

Left Scan key Enter key

Right Scan key Enter key

COM Ports (COM1 / COM4)

Baud Rate 9600

Parity None

Stop Bits 1

Data Bits 8

Barcode

Enable Code ID None

Symbology Settings Enable Dimmed / Min - 1 to Max - all

AIM (ID) Enable Dimmed

Symbol (ID) Enable Dimmed

Custom Null

Control Character Disabled

Translate All Disabled

Character/Replacement NULl / Ignore(drop)

Custom Identifiers

Name Blank

ID Code Blank

Notes:

• If the internal scanner has to be configured to operate at any communication settings other than

9600, N, 8, 1 and the MX5X either loses power or a cold boot command is entered, the

Scanner applet must be reconfigured to match the scanner communication settings.

• ActiveSync will not work over a COM port if that COM port is enabled in the Scanner applet

as scanner input. For example, if COM 1 is being used by the scanner, COM 1 can’t be used by

any other program.

• LXE 8300 Tethered Scanners and Symbology Settings (AIM ID) – Before manipulating data

received from 8300 tethered scanners, and Symbology settings are desired, the user must

configure and append the Symbology ID as a prefix.

• If Send Key Messages … is checked any data scan is converted to keystrokes and sent to the

active window. When this box is not checked, the application will need to use the set of LXE

Scanner APIs to retrieve the data from the scanner driver. Note that this latter method is

significantly faster than using Wedge.

• Disable Enable Internal Scanner Sound when you want an application, not the scan engine or

the CE operating system, to control scanner audible notifications. Adjust the settings and tap

the OK box to save the changes. The changes take effect immediately.