Computer Accessories User Manual

Length Based Barcode Stripping 155
E-EQ-MX5CERG-F-ARC MX5X Reference Guide
Length Based Barcode Stripping
Use this procedure to create symbology rules for two barcodes with the same symbology but with
different discrete lengths. This procedure is not applicable for barcodes with variable lengths
(falling between a maximum value and a minimum value).
Example 1:
• A normal AIM or Symbol symbology role can be created for the desired barcode ID.
• Next, a custom barcode symbology must be created using the same Code ID as the original
AIM or Symbol ID rule and each rule would have unique length settings.
Example 2:
For the purposes of this example, the following sample barcode parameters will be used –
EAN128 and Code128 barcodes. Some of the barcodes start with ‘00’ and some start with ‘01’.
The barcodes are different lengths.
• 34 character length with first two characters = “01” (strip first 2 and last 18)
• 26 character length with first two characters = “01” (strip first 2 and last 10)
• 24 character length with first two characters = “01” (strip first 2 and last 8). This 24 character
barcode is CODE128.
• 20 character length with first two characters = “00” (strip first 0 (no characters) and last 4)
On the Barcode tab, set Enable Code ID to AIM.
Create four custom IDs, using 1 for EAN128 barcode and 0 for Code128 barcode.
• c1 = Code = ‘]C1’
• c2 = Code = ‘]C1’
• c3 = Code = ‘]C0’ (24 character barcode is CODE128)
• c4 = Code = ‘]C1’
AIM Custom IDs