Computer Accessories User Manual

160 Summit Client Configuration
MX5X Reference Guide E-EQ-MX5CERG-F-ARC
Main Tab
Note: Terminology used on your screen displays may be different than those shown in the
figures in this chapter.
Factory Default Settings
Admin Login password SUMMIT
Radio Enabled
Active Config/Profile Default
Regulatory Domain FCC or ETSI
or
Figure 5-2 SCU – Main Tab
The Main tab displays information about the wireless client device including:
• SCU (Summit Client Utility) version
• Driver version
• Radio Type (the radio is an 802.11 b/g radio)
• Regulatory Domain
• Copyright Information may be accessed by tapping the About SCU button.
• Active Config / Active Profile profile name.
• Status of the client (Down, Associated, Authenticated, etc).
The Active Config or Active Profile can be switched without logging in to Admin mode. Selecting
a different profile from the drop down list does not require logging in to Admin mode. The profile
must already exist. LXE recommends performing a Suspend/Resume function when changing
profiles. Profiles can be created or edited after the Admin password has been entered and accepted
(LXE recommends that only the default profile be edited).
The Disable Radio button is used to disable the network card. Once disabled, the button label
changes to Enable Radio. By default the radio is enabled.
The Admin Login button provides access to editing client parameters. Profile (or Config) and
Global Settings (or Global) parameters may only be edited after entering the Admin Login
password. The password is case-sensitive. Once logged in, the button label changes to Admin
Logout. To logout, either tap the Admin Logout button or exit the SCU without tapping the Admin
Logout button.