Computer Accessories User Manual

Summit Client Configuration 169
E-EQ-MX5CERG-F-ARC MX5X Reference Guide
Parameter Factory Default Value
Ping Payload 32 bytes
Ping Timeout 5000
Ping Delay ms 1000
LED Off
Hide Passwords Off
Admin Password Blank
Auth Timeout 8 sec. (not available in all versions)
Certs Path System
CCX Off
WMM Off
Tray Icon On
Global Parameters
Parameter Default Function
RX
Diversity
On-start
on Main
How to handle antenna diversity when receiving packets from the
Access Point.
Options are: Main Only (use the main antenna only), Aux Only
(use the auxiliary antenna only), On-start on Main (on startup, use
the main antenna), or On-start on Aux (on startup, use the auxiliary
antenna).
TX
Diversity
On How to handle antenna diversity when transmitting packets to the
Access Point.
Options are: Main only (use the main antenna only), Aux only (use
the auxiliary antenna only), or On (use diversity or both antennas).
Preamble Auto The type of network header, or preamble, for packets. (Not
available in all versions)
Options are: Auto, Short, or Long.
G Short
Slot
Auto 802.1x short slot timing mode. (Not available in all versions)
Options are: Auto, On, or Off. Note The G Short Slot parameter
has no effect on the Summit client device.
This option is always set to On regardless of the parameter setting.
This parameter is not present in some versions of the SCU.
Roam
Trigger
-65 dBm If signal strength is less than this trigger value, the client looks for
a different Access Point with a stronger signal.
Options are: -50 dBm, -55, -60, -65, -70, -75, -80, -85, -90 dBm or
Custom.
Roam Delta 10 dBm The amount by which a different Access Point signal strength must
exceed the current Access Point signal strength before roaming to
the different Access Point is attempted.
Options are: 5 dBm, 10, 15, 20, 25, 30, 35 dBm or Custom.