Computer Accessories User Manual

170 Summit Client Configuration
MX5X Reference Guide E-EQ-MX5CERG-F-ARC
Parameter Default Function
Roam
Period
10 sec The amount of time, after association or a roam scan with no roam,
that the radio collects Received Signal Strength Indication (RSSI)
scan data before a roaming decision is made.
Options are: 5 sec, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60 seconds
or Custom.
Frag
Thresh
2346 If the packet size (in bytes) exceeds the specified number of bytes
set in the fragment threshold, the packet is fragmented (sent as
several pieces instead of as one block). Use a low setting in areas
where communication is poor or where there is a great deal of
wireless interference.
Options are: Any number between 256 bytes and 2346 bytes.
RTS
Thresh
2347 If the packet size exceeds the specified number of bytes set in the
Request to Send (RTS) threshold, an RTS is sent before sending
the packet. A low RTS threshold setting can be useful in areas
where many client devices are associating with the Access Point.
Options are: Any number between 0 and 2347.
Ping
Payload
32 bytes Maximum amount of data to be transmitted on a ping.
Options are: 32 bytes, 64, 128, 512, or 1024 bytes.
Ping
Timeout ms
5000 The amount of time, in milliseconds, that a device will be
continuously pinged. The Stop Ping button can be tapped to end the
ping process ahead of the ping timeout.
Options are: Any number between 0 and 30000 ms.
Ping Delay
ms
1000 The amount of time, in milliseconds, between each ping after a
Start Ping button tap.
Options are: Any number between 0 and 30000 ms.
LED Off The LED on the wireless card is not visible to the user when the
wireless card is installed in a sealed mobile device.
Options are: On, Off.
Hide
Password
Off If On, the Summit Config Utility masks passwords (characters on
the screen are displayed as an *) as they are typed and when they
are viewed. When Off, password characters are not masked.
Options are: On, Off.
Admin
Password
SUMMIT A string of up to 64 alphanumeric characters that must be entered
when the Admin Login button is tapped. If Hide Password is On,
the password is masked when typed in the Admin Password Entry
text box. The password is case sensitive. This value is masked
when the Admin is logged out.
Options are: none.