Computer Accessories User Manual

ManualsBrandsLXE ManualsComputer AccessoriesMX5X

221

222

223

224

225

226

227

228

229

230

208 Multi-Application Configuration

MX5X Reference Guide E-EQ-MX5CERG-F-ARC

Option Explanation

Order Default is 1. Enter the Order in which the application is to be loaded or presented

to the end-user. Applications are launched in lowest to highest number order.

Internet Default is Disabled. Enable the Internet checkbox to use the End-user Internet

Explorer (EUIE.EXE) When the checkbox is enabled, the Internet Menu and

Internet Status are available. See the section titled End-user Internet Explorer

(EUIE) for more details.

Launch

Button

See following section titled Launch Button.

Note: AppLock Administrator Control panel file Launch option does not inter-

relate with similarly-named options contained in other LXE Control Panels.

Global Key Default is Ctrl+Spc. Select the Global Key key sequence the end-user is to press

when switching between applications. The Global Key default key sequence

must be defined by the AppLock Administrator. The Global key is presented to

the end-user as the Activation key.

Global

Delay

Default is 10 seconds. Enter the number of seconds that Applications must wait

before starting to run after reboot.

Note: Delay (Global) may not be available in all versions of AppLock. You can

simulate a Global Delay function by setting a delay for the first application

(lowest Order) launched and setting the delay to 0 for all other applications. See

Boot Options.

Input Panel Default is Disabled. Enable (check) to show the Keyboard option on the

Switchpad menu. When enabled the input panel cannot be enabled or disabled

for each individual application, and is available to the user for all configured

applications.

Clear

Button

Tap the Clear button to clear all currently displayed Filename or Application

information. The Global settings are not cleared.

Scroll

Buttons

Use the left and right scroll buttons to move from application setup screen to

application setup screen. The left and right buttons update the information on the

screen with the previous or next configured application respectively.