Computer Accessories User Manual

Multi-Application Configuration 215
E-EQ-MX5CERG-F-ARC MX5X Reference Guide
Troubleshooting AppLock
The mobile device won’t switch from Administration mode to end-user mode.
If two copies of the same application are configured, but the application only allows one copy to
run at a time, for example Microsoft Pocket Word, the switch to end-user fails. AppLock stays in
Administration mode and is stopped until the Administrator password is entered.
The hotkey sequence needed is not allowed. What does this mean?
When the Administrator is selecting a hotkey sequence to use when switching user modes, they
are not allowed to enter key combinations that are reserved by installed software applications.
LXE has validated RFTerm key combinations ONLY.
When RFTerm is installed on the mobile device and an RFTerm restricted key sequence is
specified as a hotkey sequence by the Administrator, the following error message is displayed in a
message box:
Selected hotkey is not allowed. Please reenter.
When RFTerm is not installed on the mobile device, the RFTerm keys are not restricted from use.
See Also: Appendix D – Reference Material, sections titled AppLock Error Messages and
AppLock Registry Settings.