Computer Accessories User Manual

MX5X Hazardous Location Device 7
E-EQ-MX5CERG-F-ARC MX5X Reference Guide
MX5X Hazardous Location Device
Label : I-SAFE
Environmental Specifications
Operating Temperature -6°F to 140°F (-21°C to 60°C) [non-condensing]
Storage Temperature -60°F to 160°F (-51°C to 71°C) [non-condensing]
Rating IEC IP67
Operating Humidity 5% to 90% non-condensing at 140°F (60°C)
Vibration Based on MIL Std 810F
Read Before Use
DO NOT USE THIS UNIT IN CLASSIFIED AREAS UNSUITABLE FOR ITS SAFETY
RATINGS.
CSA C22.2 No. 213-M1987 Non-Incendive Electrical Equipment for Use in Class I, Division
2 Hazardous Locations
US and Canadian Approval
Per the Class / Division Classification System, this
unit is rated for safe use in the following classified
locations:
Class I
Division 2
Groups A, B, C, D
300° C (T2)
T
amb
-21°C to +60° C (-6°F to 140°F)
The following symbol is used to identify and warn against specific hazards, and for accident prevention purposes:
Safety Alert Symbol with Keyword Definition and Meaning
Warning
Keyword that indicates a potentially hazardous
situation which, if not avoided, could result in death or
serious injury.
Warning
To prevent ignition of a hazardous atmosphere, batteries must only be charged or changed
in an area known to be non-hazardous.
Warning
Explosion hazard – Do not disconnect while circuit is live unless area is known to be non-
hazardous.
Warning
Explosion hazard – Equipment not to be connected to a TNV source when used in a Class
I Division 2 area.
Warning
Explosion hazard – Substitution of components may impair suitability for Class I,
Division 2, Groups A, B, C, D.
Caution
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer.
Warning
Inspect enclosure for signs of deterioration such as cracking, warping, swelling or
softening. Do not use in Hazardous (Classified) Locations if there are any signs of
deterioration.